If you have a large parking lot with cracks to fill, you know that waiting for blocks of rubber sealant to melt can mean a lot of down time over the course of the day. Instead of paying your team to wait, why not keep them working by having a stationary kettle on hand melting all day long?
The RY30 Pro Melter Kettle features a dual halo burner system which melts crack filler 50% faster than torch-fired kettles. That means it takes half the time to have hot and ready sealer at hand. It also takes less propane to keep at temperature due to the enclosed burners.
Combine this with the RY10 Pro's enclosed burner system, and you have a safe, fuel-efficient combination that can be used by just one person if necessary. Compare that to large pumper units which take three people to staff!
The enclosed burner won't blow out in the wind, and if by chance it does, the flame-out sensor on both machines will stop the flow of propane to the unlit burner - that means no dangerous flashbacks when your unsuspecting crew relights the machine.
Both machines have a push-button electric start so you don't need to search for a striker or lighter to get the machines started.
The RY30 Pro includes a latching lid, so you can secure the machine on a trailer and move from spot to spot on a parking lot to reduce travel time for your crew.
Its sturdy molasses valve dispenses the hot melted rubber into the waiting RY10 Pro - check out the picture above for an example.
The RY10 Pro has on-the-fly agitation so you can keep material from scorching on the bottom as you push. Its glycerine-filled thermometer ensures you have an accurate temperature reading while you're walking. Compare that to other machines whose thermometers jump up and down wildly.
Save time, save money, and most of all keep it safe out there with the RY10 Pro and RY30 Pro asphalt crack machine combo.