Engine & Pump Combos
Looking for a replacement pump for your Asphalt Kingdom Spray System? We have them in stock and ready to ship!
Sealcoating Engines and 2" Vertically Aligned Sealer Pump Combos
Choose the right sealcoating engine and/or pump that matches your property or company’s needs.
Customers who want to replace the engine only: make sure that your preferred engine is compatible with your pump. Refer to the chart below for the right engine and pump combination.
| Engine | Pump | Product |
|---|---|---|
| Honda GX160QX 5.5HP Engine | Cast Iron | Honda GX160QX 5.5HP Engine (Compatible With Iron Pumps Only) |
| Launtop LT210Q1 7.0 HP | Aluminum | Launtop LT210 7.0HP Engine (Compatible With Aluminum Pumps Only) |
| Launtop LT210Q1 7.0 HP | Cast Iron | Launtop LT210Q1 7.0HP Engine (Compatible With Cast Iron Pumps Only) |
Note 1. The vertically aligned cast iron pump is not compatible with older engines sold with our spray systems. We recommend that you purchase a new compatible engine if you're planning to buy a vertically aligned cast iron pump.
Note 2. If you are using a pre-2019 spray system equipped with a Briggs and Stratton engine, we recommend that you buy the engine and pump with a retrofit kit. Make the transition easier by purchasing a brand new Action Seal Tote Spray System for this. With our Tote Spray System, you'll get a new spray hose, tips, and wand. Update your sealcoating engine and pump minus the hassle and without spending a hefty amount. Plus, all you have to do is connect the hoses and you're good to go.
Need to replace the engine and pump for newer spray system models (2019 models and beyond)? Then check out the chart below.
| Engine | Pump | Product |
|---|---|---|
| Honda GX160QX 5.5 HP | 2" Cast Iron Pump Assembly | Honda GX160QX 5.5HP Engine and 2" Cast Iron Pump Assembly |
| Launtop LT210 7.0 HP | 2" Aluminum Pump Assembly | Launtop LT210 7.0HP Engine and 2" Aluminum Pump Assembly |
| Launtop LT210Q1 7.0 HP | 2" Cast Iron Pump Assembly | Launtop LT210Q1 7.0HP Engine and 2" Cast Iron Pump Assembly |
FAQs
I want to buy a Honda engine. Can I use it with an aluminum pump?
Unfortunately, our aluminum pumps are incompatible with Honda engines. If you want to buy a Honda engine, you must get a compatible cast iron pump. Or if you have an aluminum pump, then you must purchase a Launtop engine.
I'm planning to use any Launtop engine with my pump. Is this possible?
Yes, but you need to choose the right Launtop engine compatible with your pump type. The Launtop LT210Q1 engine, for example, can only be used with cast iron pumps. If you have an aluminum pump, then you have to purchase the Launtop LT210 engine.
I own an old sealcoating system designed with a horizontal engine and pump. Is it possible to replace the engine only?
Newer sealcoating engine and pump models are designed with vertical configurations. If you're planning to use your old sealcoating system, we recommend that you buy a new engine and pump assembly instead (plus a retrofit kit). Please refer to note #2 on this.
Do I need to replace the seals when I purchase a new engine or engine-pump combo?
Seals are made of tough materials, but they naturally wear down over time. We recommend that you replace them after every fifty hours of use. We also recommend that you replace the main seal every time you take the pump apart for maintenance.
| Pump Type | Seal Replacement |
|---|---|
| Aluminum | Mechanical Seal For Aluminum Pump |
| Cast Iron | Viton/Tungsten Seal Assembly |
Our new sealcoating engine pumps are built to last and can withstand hours upon hours of operation every day. Whether you need a cast iron pump or an aluminum one, you can be assured that they can do the job.
Action Seal sealcoating pumps are self-priming, resulting in greater operating efficiency for you and your crew, as well as more consistent pressure throughout the operation. They also feature 2-inch loading port/output with quick connects for a hassle-free setup.
- Heavy-duty and low-maintenance sealcoating pumps
- Easy to repair
- Low emission and low noise levels — ideal for servicing quiet residential and busy commercial areas
Honda GX160QX 5.5HP Engine (Compatible With Cast Iron Pumps Only)
Honda offers more than just high-performance cars, ATVs, and motorcycles. This manufacturing giant also offers engines for sealcoating systems boasting of superb performance and dependability.
Honda engines last longer than the competition thanks to their lower vibration levels. This is a must if you're pumping viscous liquid like asphalt sealers.
They also feature low noise levels, as well as lower emissions for a safer operation for you and your crew.
Launtop 7.0HP Engine
The Launtop 7.0HP Engine offers reliable performance and durability like no other. Even better? The Launtop engines are some of the most affordable engines available right now so you get more bang for your buck.
They're versatile, too. You can easily use a Launtop engine to replace your old engine from Honda, Briggs, etc. The engines have the same dimensions and weight of 5.5hp and 6.5hp engines produced by Briggs, Honda, and other brands. Integrate the engine with ease into your existing sealcoating system and start sealcoating in a jiffy.
Note:
- Launtop LT210 is only compatible with aluminum pumps
- Launtop LT210Q1 is only compatible with cast iron pumps
Cast Iron Centrifugal Sealcoating Pump
Your sealcoating engine now has a dependable partner in the 2" Cast Iron Centrifugal Sealcoating Pump. This reliable engine pump offers consistent pressure that helps reduce downtime during busy days at the jobsite. This is a carbon ceramic seal with a heavy-duty and dynamically balanced stainless steel impeller. Also comes with a spring with FKM (Viton type) rubber.