RY10 PRO plus Half Pallet of Crackfill
At Action Seal, you can have the best deal on the RY10 Pro and a half-pallet of crack filler!
The RY10 Pro model from RynoWorx is the most advanced crack filling equipment you can have for your sealcoating business. Instead of using a torch burner, it melts crack fillers with an enclosed halo base-burner system. This contributes to flameout prevention, increase melting performance, and reduce propane costs.
For workplace safety, the RY10 Pro has an electric-button start, which removes the need to use a lighter. In the event of a flameout, you don't need to worry! The RY10's equipped auto-flame out sensor will turn off the gas. The half pallet consists of 20 crack fill boxes. Their shelf life is up to five years. This means you can store it and never worry that it won't melt.
*Free shipping in Ontario and Quebec; other provinces add $300 to major cities. If you are in a rural area not regularly serviced by our couriers we will contact you with a shipping quote to your workplace or a terminal of your choosing.
Whether you used liquid cold-pour crack filler or rubberized hot-pour crack filler, it is best to let the product dry completely before applying sealer. Depending on ambient and surface temperatures, the actual drying time of the crack fill can vary. We usually recommend allowing crack fill to dry for 24 to 48 hours before applying sealer.
You should turn the regulator down. We do not recommend leaving the crackfill material on high heat for long periods of time. The crackfill can be cooled and reheated as needed, but prolonged heating can damage it and disrupt its bonding capability