RY10MK Pro Portable 10 Gallon Kettle
FREE SHIPPING to most locations in Canada!
If you're looking for a faster, safer, cheaper way to melt hot rubber crackfiller anywhere on the job site, this is your melter. The RY10MK Pro Portable 10-Gallon Kettle is designed to be attached to a trailer or truck, or you can put it on a skid and move it around the job site as you work.
The RY10MK Pro uses a unique, patent-pending sealed burner design that melts 50 pound bricks of hot rubber crackfiller much more quickly - and more evenly - than torch-fired models. Because the burner is sealed, you can kiss flame-outs goodbye. What's more, it uses less fuel than traditional melter-applicators too - 35-50% less fuel, depending on ambient temperature. Time saved = money in your pocket!
The burner has another great feature - an automatic flame-out sensor. This means that should the flame go out for any reason, the RY10MK Pro will stop fuel from flowing to the burner. No more dangerous build-up of propane waiting for the next person who tries to light the machine - and no more wasted propane, either!
Lighting a melter has never been easier. The RY10MK Pro has an electric push-button ignition so you never have to fumble around for a striker or lighter again.
The kettle also has a UL-approved regulator and fuel lines, so you know that you'll have complete control over the amount of fuel that's going to the burner at any point. It's also got an insulated spacer between your propane cylinder and the heat of the kettle, which means a longer-lasting tank.
This machine includes a glycerine-filled thermometer for longer-lasting, precise readings. Use the sturdy molasses valve on the side to dispense crack fill to your pour pot once it reaches temperature.
RynoWorx powder coated this machine inside and out so it will last. It's been tested to work optimally at temperatures from -13°F to 104°F. Expect to get enough material melted to cover approximately six hundred feet of hot pour rubberized crackfill per hour using this machine and a bander.
The RY10MK Pro rethinks the way crack repair equipment should work. If safety, speed, and savings are on your requirement list, this is the right machine for you.
FREE SHIPPING* applies to 95% of the Canadian population. Customers in small towns or rural areas not regularly serviced by our trucks will have extra. Call or email for a quote before ordering.
Absolutely! You just have to heat it up again when you are ready to use it.
Thermocouple is responsible for shutting off the propane to a burner in the unlikely event of a flame out. This prevents unburned gas from flooding into the combustion chamber or a small smart might cause an explosion. It is an essential part of keeping you safe while working. Watch the instructional video on how to re-seat the thermocouple.
| Fluid Capacity | 10 US Gallons |
| Kettle Steel Thickness | 14 gauge |
| Assembled Dimensions | 24.9" x 22.0" x 38.0" |
| Empty Weight | 125 lbs / 56.8 kg |
| Max Capacity Weight | 223 lbs / 101.4 kg |
| Fuel Type | Propane |
| Max Fuel Pressure | 5 psi |
| Burner Type | 50,000 BTU/hr Cast Iron Sealed Burners |
| Valve Type | 2" Molasses Valve |
| Agitation Type | Manual |
| Manual | |
| Shop for Replacement Parts: |