The RY230 gallon coal tar emulsion spray system is built for the full time driveway sealing contractor. The 870 Litre (230 Gallon) tank will allow you to carry 4 full 205 Litre (55 Gallon) drums of sealer without interrupting your work schedule with sealer refills. When this tank is full you should be able to seal close to 26,000 square feet of asphalt. That equals to about 47 driveways averaging 550-600 square feet, or $5460 in revenue if your jobs are priced properly at 21 cents per square foot. Another benefit of the 870 Litre (230 Gallon) capacity is the ability to complete small parking lot jobs in 1 day without having to refill on product. If you’re confident with taking on parking lot size jobs or want to complete $5000+ weeks without having to refill then the RYNO PROSEAL 230 is the best way to go.
We’ve designed this unit with you in mind from top to bottom. This unit features a puncture proof 11 gauge steel tank that won’t warp with pressure buildup or weather fluctuation like lower value poly tanks. We’ve manufactured this unit with a large double splash manhole opening; this allows for easy cleaning and maintenance of your tank as well as spill prevention during transport. You may also use the manhole for transferring sealer or adding water to meet proper dilution. Manual paddle agitation comes standard so you can keep you sealer properly mixed on the job.
Engine & Pump:
This unit comes standard with a 6.5 HP Briggs and Stratton Engine, and a 2” centrifugal cast iron pump with Viton seals and cast iron impeller. The trigger gun makes cutting in the edges of the driveway simple and gives you precise control over the amount of sealer that is applied with a streak free finish.
The system also includes a filter kit.
Our systems spray water-based or acrylic sealer only. They do not work with petroleum or oil-based sealer. If you are purchasing sealer from anywhere other than ActionSeal, please check with your sealer manufacturer to ensure compatibility. We are unable to guarantee compatibility with any sealer other than our own.
A popular upgrade for our spray systems is the FAST TRANSFER KIT. This kit plugs directly into all Ryno Spray Systems and is required to load sealer from any drum or tote.
|Spray System Features|
- Cast Iron, Centrifugal Pump
- Circulates 225 Gallons Per Minute
- 50-60 Psi At The Tip
- 1-year Limited Warranty
- Standard - Briggs & Stratton 12s 6.5hp Gas Engine
- 2 Year Limited Warranty
- Welded Solid Steel Tank, made from 11 Gauge Steel
- Solid black powder-coated with anti-rust base
- Large, Double Layor Manhole for easy clean out and spill prevention
- Welded Hose Brackets with Locking Arms for securing hose during transport
- 870 Litre / 230 Gallon capacity
|Agitation:||Manual Agitation Plus Pump Recirculation|
|Hose:||75ft - 3/4" Length Standard Spray Hose, 150psi Rated|
- 42" Trigger Gun & Wand Includes Back Up Ball Valve
- 3 Quick Connect Spray Tips Included (2 Gpm, 3gpm & 4gpm)
|Fast Transfer Kit:||Optional|
|Tank Size (lxwxh):||65x37.5x42.5 (inches)|
|Weight (empty/full):||419/2834 (lbs)|